Installation and Pack down of your Pop-up Chameleon enclosure

How to install your Pop-up Chameleon enclosure

The installation of your NEW Pop-up Chameleon enclosure is an easy 3 or 4 step process.  The Pop-up Chameleon is comes neatly packaged in a storage/carry bag and includes the unit, user guide and tent pegs (provided in pouch).

Step 1 - Take your Pop-up enclosure out of the carry bag.

Step 2 - Allow the enclosure to open by itself.

Step 3 - Pull outward the steelwire rods on one side while keeping the central steelwire rod as the axis.

Step 4 - If you have one of our 2m pop-ups (PUC2000 or PUC1350H) pull outward the steelwire rods on the other side to complete the setup of your enclosure. Once your enclosure is complete, you can peg into the ground using the pegs provided.

PLEASE NOTE: On occasion after prolonged time packed away, the steelwire rods can twist, this will correct itself, by shaking once returned to the flattened position (see step 2).
 

How to fold away your Pop-up Chameleon enclosure

To pack away you Pop-up enclosure, first ensure that you have first removed the pegs and put back in pouch provided (if used to secure you enclosure to the ground).

Step 1 - Push inward the steelwire rods on one side while keeping the central steelwire rod in position.

Step 2 - f you have one of our 2m pop-ups (PUC2000 or PUC1350H) push inward the steelwire rods on the other side , ensure your enclosure is now flat.

Step 3 - Hold the flat panels vertically (in diagonal corners) and bring together, push downward to form circles that fold into each other.

Step 4 - Tidy up and place your enclosure back into the storage bag supplied.